WAGNER PROTEC 95-150 - Service Manual; Continuous-Flow Heater Operating Manual; Abbreviations; Terminology for the Purpose of this Manual

7
VERSION 01/2020
ORDER NUMBER DOC2340282
IceBreaker 150-300 cm
3
1.4 SERVICE MANUAL
The service manual is available in the following languages:
Language Order no. Language Order no.
German 2335993 English 2335994
Additional languages on request or at: www.wagner-group.com
1.5 CONTINUOUSFLOW HEATER OPERATING MANUAL
The operating manual Continuous-ow heater is available in the following languages:
Language Order no. Language Order no.
German 65860 English 65860
French 65860 Italian 65860
Additional languages on request or at: www.wagner-group.com
1.6 ABBREVIATIONS
Number of pieces Double stroke
Position DN Nominal diameter
Marking in the spare parts lists PN Nominal pressure
Order no. Order number Two components
Ultra-high molecular weight polyethylene PTFE
Polytetrauorethylene Stainless steel
PTFE with graphite polyethylene
: Heavy duty corrosion
protection
Leather
1.7 TERMINOLOGY FOR THE PURPOSE OF THIS MANUAL
Cleaning
Cleaning Manual cleaning of devices and device parts with cleaning
agent.
Flushing Internal ushing of paint-wetted parts with ushing agent.
Product pressure
generator
Pump or pressure tank.
Personnel qualications
Trained person Is instructed in the tasks assigned to him/her, the potential risks
associated with improper behavior as well as the necessary
protective devices and measures.
Electrically trained
person
Is instructed by an electrician about the tasks assigned to him/
her, the potential risks associated with improper behavior as well
as the necessary protective devices and measures.
Electrician Can assess the work assigned to him/her and detect possible
hazards based on his/her technical training, knowledge and
experience in relevant provisions.
Skilled person in
accordance with TRBS
1203
(2010/Revision 2012)
A person, who, based on his/her technical training, experience
and recent vocational experience, has sucient technical
knowledge in the areas of explosion protection, protection
from pressure hazards and electric hazards (if applicable) and
is familiar with the relevant and generally accepted rules of
technology so that he/she can inspect and assess the status of
devices and coating systems based on workplace safety.