Need help?Do you have a question about the wallPen E2 and is the answer not in the manual?
Details risks associated with moving parts and protective measures.
Covers health risks and handling precautions for UV ink.
Explains the importance of using ink before its expiration date.
Warns about dangers of UV radiation and necessary protection.
Provides guidelines for the safe disposal of hazardous waste.
Lists and describes the individual components of the wallPen E2.
Step-by-step guide for assembling the wallPen E2 printer.
Detailed steps for safely disassembling the wallPen E2 printer.
Instructions and tips for safely transporting the wallPen system.
Explains the RIP software for image processing and rastering.
Details the software used to control and operate the wallPen printer.
Step-by-step instructions for operating the printer via the tablet.
Provides advice and tips for achieving the best print quality.
Explains the differences between RGB and CMYK color models.
Discusses visible colors and the concept of color spaces.
Details the role and creation of ICC profiles for color accuracy.
Covers methods for adjusting and correcting colors for printing.
Explains the phenomenon of dot gain and its effect on print results.
Discusses the ink system and the importance of managing air.
Procedures for handling printhead units, especially after transport.
Step-by-step guide for refilling the ink system.
Instructions for maintaining various hardware components of the printer.
Detailed steps for calibrating printheads for optimal results.
Guide on how to replace a printhead unit on the wallPen E2.
Instructions for connecting the wallPen to a WiFi network.
Discusses various surfaces suitable for printing with wallPen.
Instructions and safety warnings for using wallPen Glass Magic.
Suggests software that aids in image preparation and viewing.
Provides key technical specifications and physical dimensions.
To Next Page
General