wallPen E2 | User Manual
42
Hardware
4.4 Transport
Transporting your Device
The wallPen is secured during transport by solid and firm transport bags. This bag
system is ideally suited for transporting the printer in your own vehicle, but also for
storing the system - protected from damage or environmental influences - for a longer
period of time.
Always stow all components in the designated bags after use.
Even if all bags are well padded and sturdy, always take great care when transporting,
loading and stowing them. Do not stack bags on top of each other. Always secure your
load sufficiently. The precise components of the wallPen can be damaged very quickly
by slipping, impact or tilting.
Take good Care! :-)
Treat & maintain your wallPen well! The machine is a sensitive technical device and can
quickly take damage if it is handled rough or treated with too little care.
· Clean all components thoroughly after use!
· Keep the machine in a clean and good condition.
· Treat it with due respect and treat it conscientiously.
To Next Page
Loading...