wallPen E2 - wallPen Glass Magic Usage

wallPen E2 | User Manual
124
Miscellaneous
10.2 wallPen Glass Magic
When to use Glass Magic?
wallPen Glass Magic is used on smooth, non-absorbent surfaces such as glass or some
ceramic tiles.
What does Glass Magic?
wallPen Glass Magic destroys the oxygen layer on surfaces. This creates the optimal
basis for UV inks to bond firmly and permanently to the substrate.
Hazard Warnings
 Danger! Corrosive!
 Risk of burns!
 Wear safety glasses and gloves at all times when working with Glass Magic!
 In case of eye/skin contact, rinse immediately with clear water and seek medical
advice.
 Danger! Glass Magic is Highly Flammable!
 Warning! Do not spray Glass Magic on hot or warm surfaces!
 Observe fire protection regulations at all times!
 Keep Glass Magic well protected and out of the reach of unauthorized persons,
especially children and animals.