wallPen E2 - Technical Data and Dimensions

wallPen E2 | User Manual
128
Miscellaneous
10.4 Technical Data & Dimensions
Voltage:
110-240 Volt
Power requirements ...
... in idle state:
... during operation:
approx. 40 watts
approx. 200 watts
Frequency:
50 Hz AC (alternating current)
Printheads:
RICOH GH2220
Printhead Electronics:
wallPen E2HDGH22
Main Control Board:
wallPen E2MCTLGH
Printhead Cables:
FFC, 24 Position, 0.5 mm pitch
Computer System:
Raspberry Pi 4B /w 4GB
OS:
wallPen Unix Distribution
Drive Communication:
CANopen
Remote Control:
Web based
Measurements:
80 x 60 x 170 / 400 cm (W x D x H)
Total Weight:
approx. 84 kg (incl. consumable supplies)
Warranty:
12 months
Shipping:
Dispatch by air freight on one euro pallet
Shipping Dimensions:
120 x 80 x 60 cm
Shipping Weight:
approx. 120 kg