wallPen E2 - Best Practice Printing

To Next Page

To Previous Page

Tablet Operation

6.2 Best Practice

6.2.1

General Print Advisories

Which settings are generally advisable for printing?

It would be too easy to answer the frequently asked question "Should I print in 1, 2, 4

or 8-pass?" with the choice between speed and quality. Fact is, that a 1-pass print

generally cannot deliver a satisfactory result and there will be clearly visible overlaps or

gaps.

Therefore, 1-pass printing is more suitable for nozzle testing. In rare cases, however,

the quality is also sufficient to print at high speed, for example on the top end of a high

wall.

With printers of the newest generation we have achieved very acceptable results in 4-

pass printing with 600 DPI horizontally and 720 DPI vertically. This setting is in many

cases an acceptable relation between quality and speed.