wallPen E2 - Page 14

wallPen E2 | User Manual
14
Safety Information
Corrosive Ink Liquid
 Danger > Ink is corrosive!
 UV Ink has the danger of skin burns
 Wear protective goggles and gloves if you are working with UV ink and may
come into contact with it, e.g. when changing, refilling and cleaning
 In case of contact with eyes, rinse affected areas immediately and thoroughly
with plenty of water (or saline solution for eyes, eye showers) and seek
medical advice! Take the MSDS sheet with UV ink with you.
 Don't underestimate the danger! Uncured UV ink is dangerous!
UV Ink and cleaner particles are hazardous to health
 There is a risk of uncured ink particles in the air during printing.
 There is danger of poisoning
· Avoid inhaling UV ink particles at any time
· Always wear a class FFP2 or FFP3 dust mask when working with ink or with
the printer
· Dispose of a mask after a maximum of six hours of use and replace it with a
new one
· Always ensure adequate ventilation when operating the printer
· In case of dizziness, discomfort, headache, eye irritation or itching, stop the
printer and immediately move to fresh air
· Always wear protective gloves and goggles when handling UV ink.
· It is important to consult a doctor as soon as possible, even if the symptoms
subside after a few minutes