Waters ACQUITY UPC2 - Page 67

November 16, 2016, 715004521 Rev. C
Page 67
Table 5–9: Core 3 configuration with a PDA, SQD, and splitter
Tube Tube description From To
ID
Notes:
recommended
trim length
129.5
PEEKsil tubing
(pre-connected to
the splitter)
Splitter module Mass
spectrometer
50 µm Do not trim
250 inch
PEEK tubing
(pre-connected to
the splitter)
Splitter module Left side of the
ccManager tee
0.010 inches Do not trim more
that 8 inches
359 inch
PEEK tubing
(pre-connected to
the splitter)
Top of the
PEEK union on
the 515
makeup pump
Splitter module 0.005 inches Trim as needed
446 inch
PEEK tubing
(pre-connected to
the splitter)
CM-A or PDA Splitter module 0.007 inches Do not trim more
that 28 inches