Page 103 of 127
13.5 Software update
A software update of the controller is carried out as follows:
1. Switch on system and keep the iLOGIK button pressed when
the start logo appears (Bluhm/Weber, iJET).
2. The following then appears on the display:
Prg: 0 PV1.0xx current program version
GA.: 0GV0.032 current gate array version
Stick?
3. Insert the USB stick with the new version.
4. The following then appears on the display:
Prg: 0 PV1.0xx new program version
GA.: 0GV0.032 new gate array version
Copy to SD?
5. By briefly pressing the iLOGIK button the new version is
copied to the internal SD card and the system restarts.
To Next Page
Loading...