Page 46 of 127
7.2 Installation
7.2.1 Controller installing
When choosing the installation location the following conditions
apply:
Consider the generally accepted ergonomic criteria in
accordance with workplace ordinances as well as country-
specific legislation.
The installation location must be a dry and dust-free room,
ideally with an ambient temperature of approx. 18…25 °C.
The installation location may not be subject to fast temperature
fluctuations (condensation!).
Do not set up the controller directly next to or above hot
surfaces, since this will affect cooling of the controller.
If the controller is operated on a tripod (accessory), the stability
of the tripod on an even foundation must be ensured.
The controller may not be exposed to flammable, explosive,
corrosive gases or chemical vapours.
The controller may not be installed in the vicinity of high voltage
equipment or power supplies.
The controller may not be subjected to direct vibrations or
shocks.
Keep controller away from direct sunlight.
Keep controller away from oil or water.
The controller may not be exposed to strong magnetic or
electric fields.
To Next Page
Loading...