Page 76 of 127
8.26 Set ink type
Depending on the application is the use of a specific ink type
necessary. The different characteristics of the inks need an
individual setting of the iJET. In the menu Select ink type you
have the possibility to choose basic settings. Certainly it’s
necessary to adapt special settings, depending on the application.
To set the ink type,
1. Touch the iLOGIK in one of the status menu.
The print image submenu is displayed.
2. Call the System submenu by rotating the iLOGIK and select it
by pressing.
The Time / Date submenu is displayed.
3. Call the Select ink type submenu by rotating the iLOGIK and
select it by pressing.
4. Set the favoured ink type by rotating the iLOGIK and confirm it
by pressing.
8.27 Select language
To set the language,
1. Touch the iLOGIK in one of the status menu.
The print image submenu is displayed.
2. The System submenu by rotating the iLOGIK and select it by
pressing.
The Time / Date submenu is displayed.
3. Call the Language submenu by rotating the iLOGIK and
select by pressing.
4. Set the favoured Language by rotating the iLOGIK and
confirm it by pressing.
To Next Page
Loading...