Page 69 of 127
8.16 Resetting ink counter
Each ink cartridge is displayed in status menu-1 with its current
filling level as a percentage.
To reset the counter after inserting a new ink cartridge, proceed as
follows:
1. Touch the iLOGIK once in one of the status menus.
The Label submenu is displayed.
2. Call Service by rotating the iLOGIK and select by pressing.
The Reset Ink Cnt. submenu is displayed.
3. Touch the iLOGIK and tick for counter reset, then confirm by
pressing, or maintain the counting position by placing a cross.
8.17 Calculate ink content
An HP ink cartridge contains 42 ml of ink, equivalent to 1.26 billion
ink droplets of approx. 33 pl each. The system counts the ink
droplets printed and uses this to calculate the ink consumption.
This function is only correct if the ink meter is reset when a new ink
cartridge is inserted.
The ink content can also be determined by weighing:
A full HP cartridge weighs approx. 110 g ± 3 g. An empty cartridge
weighs approx. 70 g ± 5 g. The residual ink in an empty cartridge is
3 ml max.
To Next Page
Loading...