Transport, packaging and storage
Page 39 of 127
5.9 Scope of delivery
1 x Device iJET Basic, iJET Advanced or iJET Pro
1 x USB-Stick; content:
Chapter 13.10, Page 106
1 x Operating manual on the USB stick
1 x iDesign-Software on the USB stick
Optional:
Mounting attachment
External light barrier
Rotary encoder
1 x Power Supply (Power cable and PoE-cable included)
6 Transport, packaging and storage
NOTE!
Installation and commissioning is performed
exclusively by the manufacturer’s staff or by
persons authorised by the manufacturer.
However, in the course of installation, operators or
maintenance staff of the operating company may
be entrusted with the handling of packages. In this
respect, be sure to observe the notes below.
6.1 Safety notes on transport
CAUTION!
Damage arising from improper transport!
Improper transport may cause significant material
damage.
Therefore:
– When offloading packages delivered and in the
course of internal transport, proceed with
caution and observe the symbols and
instructions on the packaging.
– Only remove packaging when ready for
assembly.
To Next Page
Loading...