Page 18 of 127
3.3 Intended use
The iJET has been designed, built and must be used exclusively
for the intended purpose described.
The iJET serves to create print images and to print these from
the top or side onto smooth and absorbent product surfaces,
positioned on a conveyor belt.
Intended use also includes adherence to all the specifications in
this manual.
Any use beyond the intended use or any alternative use of the
equipment is regarded as misuse and may lead to hazardous
situations.
WARNING!
Danger following misuse!
Misuse of the device may lead to hazardous
situations.
Refrain, in particular, from subjecting the apparatus
to the following:
– modification, retrofitting or alteration of the
apparatus or individual sub-assemblies.
– mounting the sub-assemblies for printing on
products from underneath.
– printing on unsuitable product surfaces.
Any claims arising from damages due to undesignated use are
rejected.
To Next Page
Loading...