Weber Markoprint iJET - Operating Conditions

Art. No.: 72801001
Technical data
Page 23 of 127
CAUTION!
The total current for the sensor and encoder
connection must not exceed 100mA.
The switching threshold of the inputs is 12V ± 2V.
The sensors / encoders must be designed for 24V operating
voltage. E.g. 24V + - 10% or 10V – 30V
4.3 Operating conditions
Environment
Specification
Value
Unit
Temperature range
5 to 40
°C
Relative humidity, maximum
(non-condensing)
10 to 90
%
Duration
Specification
Value
Unit
Maximum operating time
The device is designed for
continuous operating.