Page 75 of 127
8.25 Gate-Way- and MAC address
1. Touch the iLOGIK once in one of the status menus.
The Print image submenu is displayed.
2. Call the System submenu by rotating the iLOGIK and select
by pressing.
The Time / Date submenu is displayed.
3. Call the Gate-Way submenu by rotating the iLOGIK and
select by pressing.
A check box is displayed.
4. Set the box to write by rotating the iLOGIK and confirm by
pressing.
5. Set the Gate-Way address by rotating and confirm by touching
or jump to the next input field.
6. After all the settings have been carried out set the check box
to tick for confirmation and accept by touching the iLOGIK.
The MAC address is displayed in this submenu.
To Next Page
Loading...