Page 74 of 127
8.24 IP address und IP mask
1. Touch the iLOGIK once in one of the status menus.
The Print image submenu is displayed.
2. Call the System submenu by rotating the iLOGIK and select
by pressing.
The Time / Date submenu is displayed.
3. Call the IP-Addr. submenu by rotating the iLOGIK and select
by pressing.
A check box is displayed.
4. Set the box to write by rotating the iLOGIK and confirm by
pressing.
5. Set the IP address by rotating and confirm by touching or
jump to the next input field.
In this case also run the input facility of the IP mask.
6. After all the settings have been carried out set the check box
to tick for confirmation and accept by touching the iLOGIK.
To Next Page
Loading...