Page 60 of 127
Example product direction from right to left:
Delay Text12345
Delay Text12
Example product direction from left to right, up to now:
Text12345 Delay
Text12 Delay
Example product direction from left to right with calculation of the
print start:
Delay
Text12345
Delay
Text12
Please note that the print start delay must be set up bigger than
the text length.
If the print start delay is set up to small the print layout would be
print complete. For example: by a text length of 25 mm the set up
of the delay between 0 and 25 mm has no effect.
1. Touch the iLOGIK once in one of the status menus.
The Label Submenu is displayed.
2. Call the Parameter Submenu by rotating the iLOGIK and
select by pressing.
The Print Delay Submenu is displayed.
3. The Print Delay submenu is called by pressing the iLOGIK.
Set the desired value by rotating the iLOGIK and confirm by
briefly pressing.
To Next Page
Loading...