Wega Wegaconcept

45
Wegaconcept
Technical manual
ENGLISH
T1 T2 T3
AUTO
With this mode you can set the number of dispensed
beverages in one hour; below that value the system
places each delivery group in stand-by (little work).
Once confirmed and exited from the menu, the
machine should be turned o and back on pressing the
ENTER button, until the message "TEST OK" is displayed.
From now on, a one-week period of machine
monitoring begins.

Press (), to visualize the stand-by late minutes
REST STAND-BY
MM
ENTER Conrm to exit the menu.
05 ENERGYSAVE TIMING
06 WORKING MODE
07 STBY MODE
08 AUTOSTEAMER MODE

To exit the programming menu

press (), to view the number of possible beverages
threshold AUTO STBY
XX
ENTER Conrm to exit the menu.
05 ENERGYSAVE TIMING
06 WORKING MODE
07 STBY MODE
08 AUTOSTEAMER MODE

To exit the programming menu
28.11 Autosteamer option
To enable or disable the autosteamer, proceed as
follows:
The 3 temperature values (T1,T2 e T3) can be
programmed singularly and refer to the 3 functions on
the autosteamer keyboard:
ENTER
(x 5 secs.)
Hold down the ENTER button for at least 5 seconds.

Scroll the menu until the item is highlighted.
05 ENERGYSAVE TIMING
06 WORKING MODE
07 STBY MODE
08 AUTOSTEAMER MODE
ENTER Conrm to access the menu.
AUTOSTEAMER
YES/NO

Enable or disable the autosteamer (if you select NO, the
"Autosteamer" keyboard will be excluded).

If activated, press (), to view the programming
temperature for each dierent function.
AUTOSTEAMER (.C)
T1=XX T2=XX T3=XX

Set the desired temperature (50 ÷ 80 °C).

Press the () and () keys to switch from a value to
another.
ENTER Conrm to exit the menu.
05 ENERGYSAVE TIMING
06 WORKING MODE
07 STBY MODE
08 AUTOSTEAMER MODE

To exit the programming menu