Wega Wegaconcept

46
Wegaconcept
Technical manual
i
Once the set number of litres is reached, to eliminate
the signal on the display see chapter 32. To cancel the
signal set the litres to "000000".
28.12 Softener regeneration
To automatically display the message indicating the
need to regenerate the softener, proceed as follows:
ENTER
(x 5 secs.)
Hold down the ENTER button for at least 5 seconds.

Scroll the menu until the item is highlighted
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS
ENTER Conrm to access the menu
RIGENER. SOFTENER
XXXXX

Set the number of litres used by the machine after
which the message indicating the need for regenera-
tion will be shown
ENTER Conrm to exit the menu.
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS

To exit the programming menu
28.13 Display of the counters
This menu item allows to view a variety of information,
useful to the technician for the proper identication of
anomalies.
It also provides a valuable tool to the user when
carrying out scheduled maintenance.
Below is the list of screens in this menu with a brief
description.
ENTER
(x 5 secs.)
Hold down the ENTER button for at least 5 seconds.

Scroll the menu until the item is highlighted
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS
ENTER Conrm to access the menu
TOTAL COFFEES
XXXXX
The rst screen shows the number of total coee selec-
tions made by the machine.
To display the partial strokes for the various types of
delivery, press the respective keys on the push-button
panel. The selected key will light up, and the number of
selections made will be displayed.
You can repeat this operation for every dose key.
COUNTERS
XXXXX

Press (), to view the alarm list.
XX - DDMMYY XX - DDMMYY
XX - DDMMYY XX - DDMMYY
XX - DDMMYY XX - DDMMYY
XX - DDMMYY XX - DDMMYY
This screen shows the last 8 alarms stored by the ma-
chine. For further information, refer to chapter 30

Press (), to view the scheduled maintenance.