54
Wegaconcept
Technical manual
Where:
INS. DATE
Machine installation date or date of activation of timed
service.
SRV. PLAN
Scheduled date of required assistance.
Press () to access the timed assistance thresholds
programming/display.
TOTAL CYCLES : 053200
INS. DATE : DD / MM / YYYY
SRV. PLAN : DD / MM / YYYY
TOTAL CYCLES : 053200
INS. DATE : 29 / 06 / 2011
SRV. PLAN : 29 / 06 / 2012
Press () to activate the change: specic sector blink-
ing.
To modify the set date press the button () or () .
TOTAL CYCLES : 053200
INS. DATE : 17 / 05 / 2012
SRV. PLAN : 29 / 06 / 2012
Press () to change the sector.
To modify the date of the next maintenance interven-
tion press the button () or () .
TOTAL CYCLES : 053200
INS. DATE : 17 / 05 / 2012
SRV. PLAN : 17 / 05 / 2013
ENTER Conrm and return to the main programming menu.
Example:
To display and modify the timed assistance thresholds,
proceed as follows:
30.3 Grinders wear check
With this function, the machine displays the wear
and replacement of the grinders of the grinder-doser,
according to the kg of coee used.
ENTER
(x 5 secs.)
Hold down the ENTER button for at least 5 seconds.
Scroll the menu until the item is highlighted
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS
ENTER Conrm to access the menu
Press (), to view the number of doser alarms.
TOTAL COFFEES
XXXXXXXX
Press () repeatedly to access the rst grinders wear
control panel.
WEAR ABD BLADES
kg XXXX/YYYY
XXXX Total weight in kg of coee used since the last reset.
YYYY
Threshold to be reached in kg of coee, for signaling the
grinders wear.
ENTER Press the ENTER key, the threshold value will ash.
WEAR ABD BLADES
kg XXXX/
YYYY
To modify the quantity in kg. press the button () or
() . The available range is: 0 ÷ 2000 kg.
To modify the wear threshold proceed as follows:
To Next Page
Loading...
