Wega Wegaconcept

48
Wegaconcept
Technical manual
i
If the operation fails, it will be necessary to
manually turn the machine o and back on, while
the USB drive is inserted.
i
This procedure also updates the software of the
machine. Ensure to note the version stored in the
USB drive you are using.
i
By setting the character “-” the machine will stay
o or in energy saving mode corresponding to the
day of the week (example 1 2 - 4 5 6 7 : the machine
stays o on Wednesday).
28.16 Setting the language
To set the displayed language, proceed as follows:
ENTER
(x 5 secs.)
Hold down the ENTER button for at least 5 seconds.

Scroll the menu until the item is highlighted
13 NEW PROGRAM
14 DELIVERY TEST
15 GROUP WASHING
16 NUMBER OF GROUPS
ENTER Conrm to access the menu
LANGUAGE
ENGLISH
< EXIT AND 'OK' TO CONFIRM

Select the language to use
ENTER Conrm to exit the menu.

To exit without changes.
By conrming the new language, the machine will
delete the previous language; once done, the machine
will load the new language.
Afterwards, the machine will restart.
When it's on again, the displayed text will be in the
last language selected.
It is possible to choose one of the following languages:
t Italian
t English °C
t English °F
t French
t German
t Spanish
t Portuguese
28.15 Setting the working days
To program the start-up and shutdown of the
machine, proceed as follows:
ENTER
(x 5 secs.)
Hold down the ENTER button for at least 5 seconds.

Scroll the menu until the item is highlighted
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS
ENTER Conrm to access the menu
WORKING DAYS
1 2 3 4 5 6 7

Scroll the menu until the parameter to be highlighted
is modied

Enable or disable the working day.

Switch to another day and repeat the operation
ENTER Conrm to exit the menu.
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS

To exit the programming menu
1 Monday
2 Tuesday
3 Wednesday
4 Thursday
5 Friday
6 Saturday
7 Sunday