47
Wegaconcept
Technical manual
ENGLISH
TOTAL CYCLES : WWWWW
SRV-A: 070000 / XXXXXX
SRV-B: 140000 / YYYYYY
SRV-C: 350000 / ZZZZZZ
This screen allows you to control the scheduled main-
tenance alerts. For further information, refer to chapter
30.
Press (), to view the "Grinders wear" screen.
WEAR ABD BLADES
kg XXXX/YYYY
Press () to display the coee gram count input
screen for the individual dose keys.
k1 gr.00 k4 gr.00
k2 gr.00 k5 gr.00
k3 gr.00 k6 gr.00
kC gr.00
These last 2 screens allow you to check the grinders
wear of the grinder-doser, and to intervene accordingly.
For further information, refer to chapter 30.
ENTER Conrm to exit the menu.
28.14 Setting the date
To set the time and date shown on the display,
proceed as follows:
ENTER
(x 5 secs.)
Hold down the ENTER button for at least 5 seconds.
Scroll the menu until the item is highlighted
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS
ENTER Conrm to access the menu
CLOCK SET-UP
HH:MM DD-MM-YYYY D
AUTO
Scroll the menu until the item to be modied is high-
lighted
Modify the parameter
Switch to another parameter and repeat the operation
ENTER Conrm to exit the menu.
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS
To exit the programming menu
HH hours
MM minutes
DD day 1 Monday
MM month 2 Tuesday
YYYY year 3 Wednesday
D day of the week
¨
4 Thursday
5 Friday
6 Saturday
7 Sunday
AUTO The clock automatically switches to the Daylight
Saving time and vice versa.
MANUAL The clock doesn't switch to the Daylight Saving
time and vice versa.
Legend
To Next Page
Loading...
