6
Wegaconcept
Technical manual
A General Warnings
The manufacturer of the equipment cannot be held
responsible for damage caused by failure to oblige to
the requirements below.
B Warnings for the installer
t Read this manual carefully. It provides important
information on safe installation, operation and main-
tenance of the equipment;
t Installation, conversion to other type of gas, and
maintenance of the equipment must be carried out
by personnel qualied and authorized by the manu-
facturer, in compliance with safety regulations and
instructions included in this manual;
t identify the model of the equipment. The model is
shown on the packaging and on the nameplate of
the machine;
t Install the equipment only on sites where there is
good ventilation;
t Do not obstruct the ventilation and exhaust holes on
the machine;
t Do not tamper with the equipment components.
To Next Page
Loading...
Need help?
General
