上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
- 100 - Specialized, Concentrated, Focused
PublicFile Backup Restore DelParam Config System Run Old
Update Software
Enter ESC
Please select the sofware via Up/Down keys
\USB\NK280_BASE_1506110937.weihong
Fig. 5-3 USB list
Tip: Press S key to show the current Boot version.
Press T key to update Boot then restart.
USB device can be used!
Updating file: NCInterp.dll...
PublicFile Backup Restore DelParam Config System Run Old
Fig. 5-4 Software updating process
4) After update complete, the new software will be accessed. Fig. 5-5 is the interface booting the new
software.
To Next Page
Loading...
Need help?
General
