上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
- 12 - Specialized, Concentrated, Focused
1.2 Software Introduction
Based on embedded operating system, NK280 can be used as 4-axis system, dual Z axes system,
system for key cutting machine and system for knife grinder machine respectively according to different
hardware configurations and software versions. This manual takes the standard 4-axis system as an
example as a whole, and the unique features of other systems will be introduced separately.
The software user interface consists of five function areas, which can be chosen and switched
through the function buttons at the right of the interface. Here just lists the brief introduction to each
function area. For more details, please refer to the following chapters.
State
Including [Coor], [Motion Trace], [Current Program] and [Part Statistic] altogether 4 screens. You
can set frequently used parameters, execute common and auxiliary operations, view the machining path
and statistics in this function area.
Advanced
Including [Coor-Manage], [Centering], [User Code Input] three screens. Coordinate-related
operations can be done here, such as building and choosing coordinate system, offset operation,
centering operation, backing to the fixed point and machine origin, direct input of command and so on.
Program
Including [Local Program], [USB File], [Program Wizard] altogether 3 screens. In this area, you can
manage all the program files both in local disk and in movable disk. Besides, program wizard is provided
to generate standard program file by simple setting of parameters.
Parameter
Including [Machine Parameter], [Parameter Backup], [Coordinate Backup], [Compensation] 4
screens. In this area, you can view, set and back up parameters, save and load workpiece coordinate,
set tool compensation and screw error compensation.
System
Including [Port], [Log], [System info], this area provides ports information, log information and
system information.
To Next Page
Loading...
Need help?
General
