上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
Specialized, Concentrated, Focused - 79 -
3.16 Network Connection and Share
To enable network connection function of NK280, the computer and NK280 should be connected in
the same local area network via a network cable, ensuring the computer able to ping with NK280.
3.16.1 IP Setup
After opening NK280, set IP address to establish a network connection channel between the
computer and NK280, requiring the computer in the same subnet with NK280. For instance, if the subnet
mask is 255.255.255.0, 192.168.1.0 ~ 192.168.1.255 are in the same subnet.
3.16.1.1 Direct Connection or Switch Connection
NK280 IP Setup
Click the letter key C to enter [System Info(C)] screen, as shown in Fig. 3-56.
Fig. 3-56 system information
Clicking ―Net Info‖ will eject a dialog as shown below.
Fig. 3-57 System Info screen- Net Info
Clicking ―IP set‖ will eject a dialog requiring input of password, as shown in Fig. 3-58.
To Next Page
Loading...
Need help?
General
