上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
Specialized, Concentrated, Focused - 23 -
Binary input, low level effective; connected to
positive limit switch of Z1-axis.
Binary input, low level effective; connected to
negative limit switch of Z1-axis.
Binary input, low level effective; connected to
positive limit switch of Z2-axis.
Binary input, low level effective; connected to
negative limit switch of Z2-axis.
Common port of digital signals.
Binary input signal, connected to spindle alarm
switch of Z1.
Binary input signal, connected to spindle alarm
switch of Z1.
Binary input signal, connected to sense switch of
oil level.
Binary input signal, connected to tool sensor 1
signal (tool presetter signal).
Binary input signal, connected to tool sensor 2
signal (tool presetter signal).
Connected to cycle start button.
Connected to cycle stop button.
Signal output of
analog voltage
(from 0 to 10V)
Actual spindle speed/MAX. spindle
speed=SVC/10V.
Controlling the spindle Z1 to rotate forward.
Controlling the spindle Z2 to rotate forward.
Connected to spindle Z1 coolant switch.
Connected to spindle Z2 coolant switch.
Connected to the Z1 brake output signal of the
servo driver.
Connected to the Z2 brake output signal of the
servo driver.
Controlling the 24V on/off of the motor brake
line.
Red light on when machining ends or during
E-stop.
Light on during normal working state of machine.
To Next Page
Loading...
Need help?
General
