To Next PageTo Next Page
Need help?Do you have a question about the Window Master FlexiSmoke WSC 520 and is the answer not in the manual?
General| Brand | Window Master |
|---|---|
| Model | FlexiSmoke WSC 520 |
| Category | Fan |
| Language | English |
General safety precautions for installation and operation.
Safety warnings regarding mains voltage connection.
Safety precautions for battery handling and replacement.
Product usage scope and limitations.
Guidelines for safe wiring practices.
How to choose expansion modules for specific functionality.
Concepts for organizing motor control within the system.
Information on system expansion capabilities.
Options for the main control module interface.
Options for various expansion modules.
Module capabilities based on installed expansion modules.
Illustrative configuration scenarios for different panel types.
Motor capacity limits per motor line and module type.
Description of the 20A power supply module.
Additional hardware for system enhancement.
Components available for replacement and repair.
Overall system specifications and parameters.
Physical installation guidelines for the smoke ventilation panel.
General procedures for installing the system.
Guidelines for safe and compliant wiring practices.
Connecting cables to the panel terminals.
Specific electrical connection instructions.
Installing peripheral devices.
General assembly guidance and safety precautions.
Calculating and selecting appropriate cables for motor lines.
Ensuring cable integrity and compliance.
Method for determining optimal cable lengths.
Tables for cable length limits based on motor type.
Cable length data for ±24V standard motors.
Cable length data for MotorLink® motors.
Cable length data for pyrotechnic gas generators.
Wiring diagrams and cable types for system integration.
Detailed overview of all system modules.
Power supply module features and connections.
Control module features and connections.
Describes connecting break glass units to the system.
Describes panel-to-panel communication via CAN bus.
Describes connecting weather stations for environmental control.
Input/output module features and connections.
Standard motor module features and connections.
MotorLink® motor module features and connections.
How motor cable integrity is checked.
Cable monitoring configuration for third-party motors.
Requirements and handling of backup batteries.
Navigating and interacting with the control interface.
Understanding status indicators on the screen.
Adjusting screen orientation.
Entry point for all system settings.
Organizing system components into lines, groups, and zones.
Configuring individual motor lines.
Assigning unique numbers to motor lines.
Setting up motor line parameters.
Interpreting motor line status indicators.
Configuring groups of motors for simultaneous operation.
Setting group parameters and assignments.
Interpreting motor group status indicators.
Configuring manual activation units.
Setting up break glass units and topology.
Interpreting break glass unit status.
Defining areas for coordinated smoke control.
Configuring inputs for sensors or keypads.
Assigning numbers to local inputs.
Setting up local input functions.
Integrating weather sensors into the system.
Configuring alarm and status outputs.
Assigning numbers to local outputs.
Setting up local output functions.
Selecting the type of connected weather station.
Automating motor actions based on specific events.
Configuring magnetic door lock functions.
Configuring pyrotechnic actuators.
Configuring general alarm signal outputs.
Connecting multiple panels via CAN network for redundancy or control.
Configuring Ethernet for remote access and communication.
Integrating with KNX or BACnet communication protocols.
KNX bus configuration details and object mapping.
BACnet communication configuration details.
Managing access levels and PIN codes for security.
Saving and loading configurations from an SD card.
Saving and loading configurations from a USB stick.
General system settings like language and clock.
Setting maintenance reminders and intervals.
Viewing current system operating states and module status.
Direct control of system components like motors and zones.
Identifying incomplete system setup or missing configurations.
Diagnosing and displaying hardware faults within the system.
Troubleshooting power supply issues and battery faults.
Procedures for replacing a blown 20A fast fuse.
Procedures for replacing a blown 3.15A slow fuse.
Controlling multiple modules from a single interface.
Comprehensive overview of all system parameters and settings.
Controlling the system remotely via a PC connection.
Initial setup, testing, and verification procedures.
Pre-installation checks before applying power.
Initial power-up procedure without battery.
Power-up procedure with battery connected.
Testing the functionality of ventilation keypads.
Testing manual activation units.
Testing smoke detection functionality.
Verifying battery backup operation and system response.
Testing weather sensor inputs and system response.
Routine checks, servicing, and upkeep of the system.
Information and benefits of WindowMaster service contracts.
Procedures for swapping system modules.
Replacing specific module types.
Replacing the main control module.
Regulatory compliance documents for the system.
