CI6X SERIES SPECTROPHOTOMETER
44
3. Highlight the Checkmark icon
in the Progress Column on the confirm screen.
4. Tap the Select button to delete the selected standard.
Editing Standard Name
To rename a standard:
1. Select the standard (if not already selected) that you want to rename and move the highlight
to the Progress Column.
2. Highlight the Edit icon
and tap the Select button to view the tolerance screen.
3. Select the Edit icon
and tap the Select button to enter the standard name screen.
NOTE: Select the backspace character () and use the Left navigation button to delete the
unwanted characters.
4. Use the Left or Right navigation buttons to move the two arrows to character location and
tap the Select button.
5. Use the Up or Down navigation buttons to page through the alphanumeric list for the
character location of the name.
NOTE: You can also use the navigation control to rapidly scroll through a list by touching the
control between the arrows and circle left or right.
6. Tap the Select button set the character.
7. Tap the Left or Right navigation button to move the two arrows to the next character space
and tap the Select button.
8. Use the Up or Down navigation buttons as previously explained to set the character and tap
the Select button.
9. Continue until all characters for the name are set.
To Next Page
Loading...
Need help?
General
