CI6X SERIES SPECTROPHOTOMETER
62
JOB MODE (Ci64/Ci64UV only)
The Job mode is used to select and run a job downloaded from a software application, such as
Color iQC. A typical job displays a sequence of measurement steps on the instrument screen
followed by measurement results in the color space selected for the step. A graphically image can
also be included with each measurement step if required. You can also view the job step
sequence without performing actual measurements. Refer to the software application for specific
information on creating and downloading jobs to the instrument, and uploading job data to the
software application.
Job Mode Icons
A description of the various icons found in the job mode is shown below.
Access the main job screen.
Used to view the steps of the selected job without measuring samples.
Used to move the display to the next step in the job sequence.
Used to go back one step in the job.
Used to exit the selected job.
Accessing Job Mode
1. From the Main screen, use the Navigation buttons to move the highlight square to the Job
icon.
2. Tap the Select button to access the main job screen.
To Next Page
Loading...
Need help?
General
