LDAP
Xerox Phaser 3635 System Administration Guide 177
LDAP
6. Ensure the device is able to access the script. To enable
permissions to execute scripts on a Windows 2003 server:
a) Click on the [Start] menu.
b) Select [Programs].
c) Click on [Administrative Tools].
d) Select [Manage Your Server].
e) Select [Web Interface for Remote Administration of Web
Services].
f) Select [Web Server].
g) Select [Web Execute Permissions and enable scripts and
executables].
Problem Action
Problem Action
I cannot access the LDAP Address
Book.
Ensure that the LDAP Server information is configured correctly within
CentreWare Internet Services.
The time taken to perform a
search exceeds the maximum
limit.
The machine contacted the LDAP Server, but the time to perform the
search exceeds the maximum search time defined by the
Administrator.
1. Enter a more specific name at the machine to refine the search.
2. Increase the number in the [Wait... seconds] box to increase
the time of the search. This is located within the CentreWare
Internet Services LDAP screen.
3. Verify there are no communication problems with the LDAP
server.
The number of search results
exceeds the limit set on the LDAP
server.
The number of search results exceeds the limit set on the LDAP server.
1. Enter a more specific name at the machine to refine the search.
2. Increase the number in the Maximum Number of Search
Results. This is the maximum number of addresses that will
appear which match the search criteria selected by the User.
Set the Maximum Number to one less than the LDAP server will
allow. For example, if the LDAP server limit is 75, set the search
results to 74 or less. This setting is located within the Internet
Services LDAP screen.
To Next Page
Loading...
