Xerox 3635MFP - Phaser B/W Laser User Manual

Unix
Xerox Phaser 3635 System Administration Guide 29
18. Click on [Continue].
19. The Printer Added Successfully message will appear.
Dynamic Addressing
Information Checklist
See Chapter 3, Configure Dynamic IPv4 Addressing using the Machine User Interface,
Information Checklist on page 15.
Procedure
1. Follow the steps in Chapter 3, Configure Dynamic IPv4 Addressing using the Machine
User Interface, Procedure on page 16 until step 38, then return to this page.
IMPORTANT: Click on [BOOTP] in step 9.
Create the Print Queue
2. Follow the steps above in Create the Print Queue on page 29.
Linux LPR via PrintTool
Static Addressing
Information Checklist
Before starting the Installation procedure, please ensure that the following items are
available and/or the tasks have been performed:
1. See Chapter 3, Configure Static IPv4 Addressing using the Machine User Interface,
Information Checklist on page 13.
2. Linux operating system that supports PrintTool.
NOTE: Not all distros of Linux support PrintTool.
Procedure
1. Follow the steps in Chapter 3, Configure Static IPv4 Addressing using the Machine
User Interface, Procedure on page 14 until step 38, then return to this page.
Create the Print Queue
2. Log in, at the Linux Client, as root in a terminal.
3. Enter printtool.
4. The Red Hat Linux Print System Manager will launch.
5. Click on the [Add].
6. The [Add a Printer Entry] window will appear.

Xerox 3635MFP - Phaser B/W Laser Specifications

General

Print Technology	Laser
Standard Paper Capacity	550 sheets
Duplex Printing	Yes
Fax Modem Speed	33.6 Kbps
Operating System Compatibility	Windows, Mac, Linux
Functions	Fax
Print Resolution	1200 x 1200 dpi
Automatic Document Feeder	Yes
Connectivity	USB, Ethernet
Scan Resolution	600 x 600 dpi
Maximum Paper Size	8.5 x 14 inches
Print Speed	Up to 35 ppm
Copy Speed	Up to 35 cpm