Troubleshootin
Xerox Color 550/560 Printer
User Guide
285
Probable Causes
Solutions
The printer is set to a slower printing mode
(forexample, heavyweight stock).
It takes more time to print with special media. Make sure
that the media type is set properly in the printer driver and at
the printer control panel.
The printer is in power saving mode.
It takes time for printing to start in power saving mode.
The job is very complex. Wait. No action needed.
Printing Takes Too Long
Probable Causes
Solutions
The power cord is not correctly plugged into the
outlet.
Turn off the printer, confirm that the power cord is correctly
plugged into the printer and the outlet, then turn on the
printer.
A system error occurred.
Contact your local Xerox service representative with the fault
information. Check the fault history. For details, see Control
Panel Messages.
Printer Resets or Turns Off Frequently
To Next Page
Loading...
Need help?
General
