Initial Setup
Xerox
®
B215 Multifunction Printer
User Guide
54
USB Direct Connection
If your printer is connected to your computer directly, using a USB AB cable, configure settings using
Xerox Easy Printer Manager.
1. Connect the one end of the USB AB cable to the USB B port on the back of the printer. Connect
the other end to a standard USB A connection on your computer.
2. At your computer, open Easy Printer Manager.
3. Click Printer, then select the USB connected printer.
4. Click Advanced Setting or Machine Settings.
5. Configure the device and network settings required. Click Save.
Installation Wizard
The Installation wizard starts the first time you power on the printer. The wizard prompts you with a
series of questions to help you configure basic printer settings.
When the installation wizard appears, follow the on screen instructions.
When the installation wizard has completed, to configure basic fax settings, use the Fax Setup wizard.
For details, refer to Fax Settings.
Note: After the initial setup, to change any printer configuration settings, or to configure other
printer settings, refer to Accessing Administration and Configuration Settings.
To Next Page
Loading...
