Xerox B215 - General Setup

General Setup
Xerox
®
B215 Multifunction Printer
User Guide
55
General Setup
General Setup Using the Printer Control Panel
Setting Date and Time
Use the Date and Time feature to set or view the printer date, time, and time zone. These settings
affect the date and time stamp that appears on various printed documents and reports.
1. At the printer control panel, press the Home button.
2. Touch Device
 General  Date & Time.
3. Select an option:
• Time Zone: Touch the region where the printer is located.
• Date: Set the Day, Month and Year, then touch
 Confirm.
• Time: Set the hour and minutes, then touch AM, PM or 24 H. Touch
 Confirm.
• Date Format: Touch the date format required, then touch
 Confirm.
4. Touch X.
5. To return to the home screen, press the Home button.
Setting Display Brightness
You can adjust the brightness of the touch screen display.
1. At the printer control panel, press the Home button.
2. Touch Device
 General  Display Brightness.
3. Select a brightness option, then touch
 Confirm.
4. To return to the home screen, press the Home button.
Power Saver Timer Settings
The amount of electricity the printer consumes depends on the way it is used. This device is designed
and configured to enable you to reduce your electricity usage.
Power Saver modes are enabled on your device by default to reduce energy consumption. If the printer
is not used for a specified period, it transitions to Low Power mode, then to Very Low Power mode. In
these modes, to enable reduced-power consumption, only essential functions remain active.
Note: Changing the default Power Saver activation times can result in an overall higher energy
consumption of the printer. Before you switch off Power Saver modes or set a longer activation
times, consider the increase in printer power consumption.
1. At the printer control panel, press the Home button.
2. Touch Device
 General  Power Saver Timer.