Xerox C325 - Page 181

MENU ITEM DESCRIPTION
LLiinneess ppeerr PPaaggee
1–255 (60*)
Specify the number of lines of text for each page
printed through the PCL datastream.
Note:
• This menu item activates vertical
escapement that causes the selected
number of requested lines to print between
the default margins of the page.
• 60 is the U.S. factory default setting. 64 is
the international factory default setting.
PPCCLL55 MMiinniimmuumm LLiinnee WWiiddtthh
1–30 (2*)
Set the initial minimum stroke width.
Note: Jobs printed in 4800 CQ use half the
value.
PPCCLLXXLL MMiinniimmuumm LLiinnee WWiiddtthh
1–30 (2*)
AA44 WWiiddtthh
• 198 mm*
• 203 mm
Set the width of the logical page on A4-size paper.
Note: Logical page is the space on the physical
page where data is printed.
AAuuttoo CCRR aafftteerr LLFF
• On
• Off*
Set the printer to perform a carriage return after a line
feed control command.
Note: Carriage return is a mechanism that
commands the printer to move the position of
the cursor to the first position on the same line.
AAuuttoo LLFF aafftteerr CCRR
• On
• Off*
Set the printer to perform a line feed after a carriage
return control command.
TTrraayy RReennuummbbeerr
• Assign Tray 1
• Assign Manual Paper
• Assign Manual Envelope
Configure the printer to work with a different print
driver or custom application that uses a different set of
source assignments to request a given paper source
TTrraayy RReennuummbbeerr
View Factory Defaults
Show the factory default value assigned for each paper
source.
TTrraayy RReennuummbbeerr
Restore Defaults
Restore the tray renumber values to their factory
defaults.
Xerox
®
C325 Color Multifunction Printer User Guide 181
Use Printer Menus