Xerox C325 - Setting up and Using the Accessibility Features; Activating Voice Guidance; From the Keyboard; Deactivating Voice Guidance

Setting up and Using the Accessibility Features
Note: Keyboard is the preferred method for using accessibility features.
Note: For the instructions on how to navigate the screen using the keyboard, refer to www.xerox.com to view
the Accessibility Guide of your printer.
Note: The adjustment of speech rate, headphone volume, and speaker volume is most effective when done
using the keyboard.
ACTIVATING VOICE GUIDANCE
From the Keyboard
1. Press and hold the 5 key until you hear a voice message.
Note: For printer models without built-in speakers, use headphones to hear the message.
2. Press Tab to navigate the focus cursor to the OK button, then press Enter.
• Voice Guidance has limited language support.
The supported languages are English, French, Italian, German, or Spanish.
• Keyboard is the preferred method for using accessibility features.
DEACTIVATING VOICE GUIDANCE
To deactivate Voice Guidance by doing either of the following:
• From keyboard, press and hold the 5 key until a voice message is heard.
• Press the power button to put the printer in Sleep or Hibernate mode.
ENABLING MAGNIFICATION MODE
1. From keyboard, press and hold the 5 key until a voice message is heard.
2. Navigate using Tab key to toggle Magnification mode on or off.
For more information on navigating a magnified screen, refer to Navigating the Screen Using Gestures for Zoom
and Pan.
NAVIGATING THE SCREEN USING GESTURES FOR ZOOM AND PAN
Note: Gestures are applicable only when Voice Guidance is activated.
Note: Enable Magnification to use the zoom and pan gestures.
Note: Use a physical keyboard to type characters and adjust certain settings.
Note: If the gesture does not work, then apply more pressure.
Xerox
®
C325 Color Multifunction Printer User Guide 63
Set up, Install, and Configure