Networking
CONNECTING THE PRINTER TO A WI-FI NETWORK
Ensure that, Active Adapter is set to Auto. From the home screen, touch Settings > Network/Ports > Network
Overview > Active Adapter.
Using the wireless setup wizard in the printer
Before using the wizard, ensure that the printer firmware is updated. For more information, refer to Updating
Firmware.
1. From the home screen, touch SSeett uupp nnooww.
2. Select a Wi-Fi network, then type the network password.
3. Touch DDoonnee.
Using the Settings Menu in the Printer
1. From the home screen, touch Settings > Network/Ports > Wireless > Setup On Printer Panel > Choose
Network.
2. Select a Wi-Fi network, then type the network password.
Note: For Wi-Fi-network-ready printer models, a prompt to set up the Wi-Fi network appears during initial
setup.
CONNECTING THE PRINTER TO A WIRELESS NETWORK USING WI-FI PROTECTED SETUP (WPS)
Before you begin, ensure that:
• The access point (wireless router) is WPS-certified or WPS-compatible. For more information, see the
documentation that came with your access point.
• A wireless network adapter is installed in your printer. For more information, see the instructions that came with
the adapter.
• Active Adapter is set to Auto. From the home screen, touch Settings > Network/Ports > Network Overview >
Active Adapter.
Using the Push Button method
1. From the home screen, touch Settings > Network/Ports > Wireless > Wi-Fi Protected Setup > Start Push
Button Method.
2. Follow the instructions on the display.
Using the personal identification number (PIN) method
1. From the home screen, touch Settings > Network/Ports > Wireless > Wi-Fi Protected Setup > Start PIN
Method.
96
Xerox
®
C325 Color Multifunction Printer User Guide
Set up, Install, and Configure
To Next Page
Loading...
