• Load the labels face up in the tray, then adjust the length and width of the paper guides to fit the labels.
5. From the Paper menu in the control panel, set the paper size and paper type to match the paper loaded in the
multipurpose feeder.
LINKING TRAYS
1. From the home screen, touch Settings > Paper > Tray Configuration, then select a paper source.
2. Set the same paper size and paper type for the trays that you are linking.
3. From the home screen, touch Settings > Device > Maintenance > Config Menu > Tray Configuration >
Tray Linking.
4. Touch Automatic.
To unlink trays, ensure that no trays have the same paper size and paper type settings.
WWaarrnniinngg:: The temperature of the fuser varies according to the specified paper type. To avoid printing
issues, match the paper type setting in the printer with the paper loaded in the tray.
Xerox
®
C325 Color Multifunction Printer User Guide 91
Set up, Install, and Configure
To Next Page
Loading...
