Connecting the printer to a wall jack in Germany
The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines.
The F port is for telephones. Connect the printer to any of the N ports.
1. Connect one end of the telephone cable to the line port of the printer.
2. Connect the other end of the cable to the RJ11 adapter, then connect the adapter to an N port.
3. If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as
shown.
CONNECTING TO A DISTINCTIVE RING SERVICE
A distinctive ring service lets you have multiple telephone numbers on one telephone line. Each telephone number is
assigned a different ring pattern.
1. From the control panel, navigate to:
Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls > Answer On.
2. Select a ring pattern.
3. Apply the changes.
SETTING THE FAX DATE AND TIME
1. From the control panel, navigate to:
Settings > Device > Preferences > Date and Time > Configure.
2. Configure the settings.
CONFIGURING DAYLIGHT SAVING TIME
1. From the control panel, navigate to:
Settings > Device > Preferences > Date and Time > Configure.
For non-touch-screen printer models, to navigate through the settings, press OK.
Xerox
®
C325 Color Multifunction Printer User Guide 71
Set up, Install, and Configure
To Next Page
Loading...
