SETTING UP SCAN CENTER
1. From the home screen, touch Scan Center.
2. Select and create a destination, then configure the settings.
Note:
• When creating a network destination, ensure to validate and adjust the settings until no errors occur.
• Only destinations created from the Embedded Web Server are saved. For more information, see the
documentation that came with the solution.
3. Apply the changes.
CREATING A SHORTCUT
1. From the home screen, touch Shortcut Center.
Note: The icon and name may have been changed. For more information, contact your administrator.
2. Select a printer function, then touch Create Shortcut.
Note: The Secure Email function is not supported.
3. Configure the settings, then touch Save.
4. Type a unique shortcut name.
Note: To avoid clipped names on the home screen, type only up to 25 characters.
5. Touch OK.
The application automatically generates a unique shortcut number.
Note: To launch the shortcut, touch keypad icon, and touch #, then enter the shortcut number.
SETTING UP CARD COPY
1. Open a web browser, and type the printer IP address in the address field.
Note:
• View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
2. Click Apps > Card Copy > Configure.
Note:
• Ensure that Display Icon is enabled.
• Ensure that Email Settings and Network Share Settings are configured.
• When scanning a card, ensure that the scan resolution does not exceed 200 dpi for color and 400 dpi for
black and white.
Xerox
®
C325 Color Multifunction Printer User Guide 59
Set up, Install, and Configure
To Next Page
Loading...
