Xerox C325 - Using the On‑screen Keyboard; Adjusting the Voice Guidance Speech Rate; Adjusting the Default Headphone Volume; Adjusting the Default Internal Speaker Volume

GESTURE FUNCTION
Triple-tap using one finger Zoom in or zoom out text and images.
Pan Access parts of the zoomed image that are beyond the limit
of the screen.
Note: Use two fingers to drag a zoomed image.
USING THE ON-SCREEN KEYBOARD
When the on-screen keyboard appears, do one or more of the following:
• Touch a key to announce and type the character in the field.
• Drag a finger across different characters to announce and type the character in the field.
• Touch a text box using two fingers to announce the characters in the field.
• Touch Backspace to delete characters.
ADJUSTING THE VOICE GUIDANCE SPEECH RATE
1. From the home screen, touch Settings > Device > Accessibility > Speech Rate.
2. Select the speech rate.
ADJUSTING THE DEFAULT HEADPHONE VOLUME
1. From the home screen, touch Settings > Device > Accessibility.
2. Adjust the headphone volume.
Note: The volume resets to the default value after the user exits Accessibility mode or when the printer
wakes from Sleep or Hibernate mode.
ADJUSTING THE DEFAULT INTERNAL SPEAKER VOLUME
1. From the home screen, touch the Keypad icon.
2. Adjust the volume.
Note:
• If Quiet Mode is enabled, then audible alerts are turned off. This setting also slows the printer
performance.
• The volume resets to the default value after the user exits Accessibility mode or when the printer wakes
from Sleep or Hibernate mode.
ENABLING SPOKEN PASSWORDS OR PERSONAL IDENTIFICATION NUMBERS
1. From the home screen, touch Settings > Device > Accessibility > Speak Passwords/PINs.
64
Xerox
®
C325 Color Multifunction Printer User Guide
Set up, Install, and Configure