Xerox C325 - Using Display Customization; Managing Screen Saver and Slide Show Images; Changing the Wallpaper Image; Running a Slide Show from a Flash Drive

• When scanning multiple cards, ensure that the scan resolution does not exceed 150 dpi for color and
300 dpi for black and white.
3. Apply the changes.
Note: You require a printer hard disk or an intelligent storage drive to scan multiple cards.
USING DISPLAY CUSTOMIZATION
Before using the application, ensure to enable and configure the screen saver, slide show, and wallpaper settings.
From the Embedded Web Server, click Apps > Display Customization > Configure.
Managing Screen Saver and Slide Show Images
1. From the Embedded Web Server, click Apps > Display Customization > Configure.
2. In the Screen Saver and Slide show Images section, add, edit, or delete an image.
• You can add up to 10 images.
• When enabled, the status icons appear on the screen saver only when there are errors, warnings, or
cloud-based notifications.
3. Apply the changes.
Changing the Wallpaper Image
1. From the home screen, touch Change Wallpaper.
2. Select an image to use.
3. Apply the changes.
Running a Slide Show from a Flash Drive
1. Insert a flash drive into the front USB port.
2. From the home screen, touch Slide show.
Note: You can remove the flash drive after the slide show starts, but the images are not stored in the printer.
If the slide show stops, then insert the flash drive again to view the images.
MANAGING BOOKMARKS
Creating Bookmarks
Use bookmarks to print frequently accessed documents that are stored in servers or on the web.
1. Open a web browser, then type the printer IP address in the address field.
• View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
60
Xerox
®
C325 Color Multifunction Printer User Guide
Set up, Install, and Configure