Xerox Color C75 Press - Page 299

024-988
Cause: The booklet folder tray is full
Remedy: Check that the folder tray is correctly attached and set.
024-989
Cause: There is a problem with the booklet maker stapler
Remedy: Check the staple cartridge and reset correctly.
047-320
Cause: A communication error has occurred with the finisher
Remedy: Perform the following:
Power off/on the machine, and if necessary, resend/restart your print job.
If the error persists, contact the Customer Support Center.
112-700
Cause: The Punch Waste Container is full or near full
Remedy: Remove and empty the waste container, then reinstall it.
116-790
Cause: The settings for stapling are canceled and prints the data
Remedy: Confirm the staple position and try to print again.
124-705
Cause: The settings for punching are canceled
Remedy: Confirm the punching position and try to print again.
124-706
Cause: The settings for folding are canceled
Remedy: Confirm the folding settings and try to print again.
124-709
Cause: The number of pages exceeds the number of pages that can be stapled
Remedy: Decrease the number of pages, or cancel the stapling settings, then try to
print again.
17-51Xerox
®
Color C75 Press
User Guide
Standard/Booklet Maker Finisher