Covers
This option allows you to attach covers to the booklet. The front and back covers can
be output before the first page and after the last page of the document and on a
different type of paper. Select a Covers option:
• No Covers: No covers are added.
• Blank Covers: Blank media is attached to the output to provide blank covers.
• 2 Sided Covers: The first and second pages of the document are copied on both sides
of the cover.
• 1 Sided Covers: The first page of the document is copied on the front side of the
cover.
Last Page on Back Cover
This option uses the image of the last document page and copies it onto the back
cover.
This option is only available for 1 Sided Covers.
Binding Shift
Use this option to set the booklet binding-shift value within the range from 0 to 1.9 in.
(0 to 50 mm) in 0.1 in. or 1 mm increments.
Divide Output
Use this option when you have a large number of original documents. The original
documents are divided to create subsets in order to reduce the thickness of each booklet.
The machine folds copies in half, and piles them up to form a booklet. The Light
Production C Finisher with Booklet Maker allows you to specify the number of sheets
within the range of 1-50 sheets in one-sheet increments.
Auto Image Positioning
This option adjusts the image position so that the printing position from the edge of
each page remains consistent between the inner and outer pages of the booklet. Auto
Image Positioning is available for selection if you have already selected Create Left/Top
Bound Booklet or Create Right Bound Booklet.
Offset Stacking
This option is available only when specific optional finishers are attached, such as the
Standard Finisher or Booklet Maker Finisher.
5-17Xerox
®
Color C75 Press
User Guide
Copy
To Next Page
Loading...
Need help?
General
