When loading originals
Select this option if you want the elevator tray to raise when you load documents in the
document feeder.
When pressing Start
Select this option if you want the document feeder elevator tray to raise when you press
the Start button on the control panel.
Estimated Job Time
Select the default setting that is displayed for the estimated job completion time.
Cumulative time for all jobs
Select this option if you want the machine to display the total time for all jobs.
Time required for a single job
Select this option if you want the machine to display the time required for a single job.
Restrict Recipient Selection Method
Select the default setting that is displayed for the recipient selection. Select Yes or No.
Restrict User to Edit Address Book
This feature allows you to specify if the user is allowed to edit Address Book information.
Select Yes or No.
Paper Tray Attributes During Loading
When a paper tray is removed from the machine and then replaced, selecting Disabled
or Enabled determines whether or not the tray change is displayed on the UI.
1. From the Paper Tray Settings select Paper Tray Attributes During Loading.
2. Select one of the following:
• Off: If this feature is selected, then the UI does not display the paper tray attributes
while you are loading paper in the tray.
• On: If this feature is selected, the UI displays the paper tray attributes as you are
loading paper into the tray
3. From the Paper Tray Settings screen, select Paper Tray Priority.
Paper Tray Priority
Xerox
®
Color J75 Press9-52
System Administration Guide
Common Service Settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
