b) Enter a group name (either a new one or edit an existing name).
c) Select Save.
The Authorization Group screen is displayed.
7. Select the next item to be set or changed.
a) Select Change Settings.
b) Make the appropriate selection for the group.
c) Select Save.
The Authorization Group screen is displayed.
8. Repeat the previous steps for any other desired group options and when finished,
select Close.
The Create Authorization Groups screen is displayed.
9. Repeat the previous steps to create or edit more groups.
10. When finished, select Close.
The main Tools tab screen is displayed.
11. Exit administrator mode.
User Details Setup
This feature allows you to configure the settings for user ID authentication. The available
settings depend on the authentication type selected at Tools > Authentication/Security
Settings > Authentication > Login Type. Possible options include the following:
• Mask User ID
• Failed Access Log
• Display Login Status
• Logout Confirmation
• UserID for Login
1. Login as administrator.
2. Access the Tools tab on the UI.
3. Select Authentication/Security Settings > Authentication.
4. Select User Details Setup.
The options that display depend on the type of authentication that is enforced;
available options depend on the Login Type selected.
5. Select the item to be set or changed.
6. Select Change Settings.
7. Follow the instructions on the UI to change the settings.
8. Select Save.
The previous screen is displayed.
9. If desired, select another option to set or change and repeat the previous steps.
10. Select Close.
The main Tools tab screen is displayed.
11. Exit administrator mode.
21-9Xerox
®
Color J75 Press
System Administration Guide
Authentication/Security Settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
