Maintenance
162 ColorQube 8700/8900 Color Multifunction Printer
User Guide
General Precautions
WARNING: Parts of the printer are hot and need time to cool down before moving or packing the
printer. To avoid personal injury or printer damage, wait 30 minutes for the ink to solidify and the
printhead to cool down.
CAUTION: When cleaning your printer do not use organic or strong chemical solvents or aerosol
cleaners. Do not pour fluids directly into any area. Use supplies and cleaning materials only as directed
in this documentation.
WARNING: Keep all cleaning materials out of the reach of children.
WARNING: Do not use pressurized spray cleaning aids on or in the printer. Some pressurized sprays
contain explosive mixtures and are not suitable for use in electrical applications. Use of such cleaners
increase the risk of fire and explosion.
WARNING: Do not remove the covers or guards that are fastened with screws. You cannot maintain
or service any parts that are behind these covers and guards. Do not attempt any maintenance
procedure that is not described in the documentation supplied with your printer.
WARNING: Internal parts of the printer can be hot. Use caution when doors and covers are open.
To avoid damaging the printer, follow these guidelines:
Do not place anything on top of the printer.
Do not open covers and doors during printing.
Do not tilt the printer while it is hot.
Do not touch the electrical contacts or gears. Doing so could damage the printer and cause the print
quality to deteriorate.
Ensure any parts removed during cleaning are replaced before you plug in the printer.
To Next Page
Loading...
