Paper and Media
ColorQube 8700/8900 Color Multifunction Printer 53
User Guide
6. Close the tray. A message appears on the control panel.
7. Verify that the paper is the correct size, type, and weight. If not, change the paper settings.
8. On the printer touch screen, touch Confirm.
Configuring the 1800-Sheet High-Capacity Feeder
The 1800-Sheet High-Capacity Feeder is a dedicated paper tray. It must be configured to support the
paper in use. If the tray has not been used, it must be configured for the desired paper size. If you are
changing the paper size, you must reconfigure the tray for the new paper size. For details on supported
paper sizes, see Supported Paper on page 44.
Before changing the drawer configuration, always compare the paper size to the configuration of the
1800-Sheet High-Capacity Feeder. If the paper size matches, no adjustment is needed.
1. Pull out the tray until it stops.
2. Remove the paper from the paper tray.
To Next Page
Loading...
